Terms and Conditions of Sale

II. PRICES. Prices are as set forth on the applicable written quotation. Written quotations are valid for 30 days. Prices for non-quoted products or services (which shall include, except as otherwise expressly provided herein, the Value-Added Services in Section XVIII below) or contained on expired quotations are subject to Seller’s change without notice.

III. PAYMENT. Unless otherwise stated in Seller’s quotation, payment terms are Net 30 days from invoice date. No discounts are authorized. Seller may at any time, without notice, change or suspend credit terms, stop shipment or cancel unfilled purchase orders when, in Sellers sole discretion, the financial condition of Buyer or its account so warrants. Or when delivery is delayed through any fault of the buyer, or when Buyer is delinquent on any payment for invoiced products or services. Invoices not paid may be subject to a service charge of 1.5% per month on the past due amount. Without limiting the above provisions, in the event Buyer does not pay all amounts due and owing within allowed payment terms, Seller may withhold further shipments until acceptable payment is made. Shipment holds shall not constitute Seller’s breach and Seller, in sole discretion, may continue to perform in accordance with Buyer’s purchase order.

IV. TAXES. Prices quoted for products or services do not include any applicable federal, state, or local taxes, all of which shall be paid by Buyer. In States where Seller has nexus, Buyer may be invoiced for applicable taxes unless Buyer furnishes a valid resale or tax exemption certificate.

V. SHIPMENTS/RISK OF LOSS/DELIVERY. Unless otherwise stated in Seller’s quotation, all shipments will be EXW point of shipment. All risks of loss and damage shall pass to Buyer upon shipment. Delivery and shipment dates are estimates only, are not guaranteed, and are determined from the date Buyer’s purchase order is received. Seller’s failure to ship or deliver as scheduled shall not entitle Buyer to cancel or to damages of any kind. Buyer’s acceptance of all or part of a shipment shall constitute Buyer’s waiver of all claims for delayed shipment. In the event that, pursuant to a valid, accepted purchase order, Seller has committed delivery and established a shipment schedule, and Buyer requests delayed shipment(s),Seller may charge Buyer an inventory holding charge equal to 2% of the value of held inventory per month of delay beyond30 days. Seller shall invoice Buyer for such charge and such charge shall be paid in accordance with Section III hereof.

VI. CANCELLATION. Buyer shall have no right to cancel a purchase order without first obtaining Seller’s prior written consent, which shall be given at Seller’s sole and absolute discretion. Cancellation charges for special, custom, or standard products or services shall be 100% of all costs incurred to the time of cancellation.

VII. QUANTITIES. All shipments shall be subject to a 10% over-or under-run of the quantity ordered, which over-or under runs shall constitute Seller’s compliance with Buyer’s purchase order.

VIII. ACCEPTANCE. All shipments falling within the acceptance level set forth by Seller’s specifications shall be accepted by Buyer by the lot and, once accepted; nonconforming items within the lot shall not be returnable for replacement or credit. Except as otherwise provided in these Ts&Cs, in the event a shipment does not conform to the required acceptance level, the shipment may be returned to Seller upon obtaining Seller’s prior written verification and approval. Nonconforming products returned to Seller shall be separately packaged, and marked to clearly identify the shipment, Shipping charges shall be prepaid and reimbursed by Seller to Buyer in the event Seller determines the products to be defective. In the event Seller determines that returned products are not defective, shipping charges shall be Buyer’s responsibility. In no event shall Seller be responsible for packing, inspection, labor or other charges in connection with products returned for inspection. Buyer’s failure to return products as provided in these Ts&Cs within thirty 30 days of Buyer‘s receipt of Seller’s approval for such return shall terminate Seller’s obligation with respect to any such nonconforming products.

IX. WARRANTY. Except as otherwise provided below in Section XVIII for value added Services, and expressly subject to Buyer storing the products in accordance with Sellers recommendations, Seller warrants the products to be free from defects in materials and workmanship for a period of 6 months from the date of shipment. Seller’s sole obligation for nonconforming products shall be to repair or replace such products at a location designated by Seller or credit the purchase prices of such products, at Seller’s sole option. EXCEPT AS SET FORTH ABOVE, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, OF ANY NATURE WHATSOEVER, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

X. LIMITATION OF LIABILITY. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY SPECIAL, INDIRECT INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND WHATSOEVER, WHETHER IN CONTRACT, TORT OR OTHERWISE, EVEN IF SELLER IS OR SHOULD BE AWARE OF THEPOSSIBILITIES THEREOF.

XI. TITLE. Title to products sold hereunder shall pass to Buyer upon delivery of the products to the carrier. Notwithstanding such passage of title, however, Seller shall retain a purchase money security interest in the products and any proceeds from the sale thereof. Buyer shall execute any and all documents necessary to perfect such security interest.

XII. PATENTS. Buyer shall indemnify, defend and hold harmless Seller from and against any expenses, costs or losses resulting from alleged infringement of any intellectual property rights arising from Seller’s compliance with Buyer’s designs, specifications or instructions. Seller gives no warranties of non-infringement with respect to the products or services.

XIII. TOOLING. Seller, charging in full or part, shall insure maintenance in good condition and for a reasonable period all tooling, molds, fixtures, etc. (“Tooling”). Provided however, Seller shall have the right to disposition tooling inactive for more than 24 months with any resulting value belonging to Seller to offset maintenance and storage costs. Seller shall not charge Buyer additional amounts for the use of Tooling in connection with Buyer’s subsequent orders for products of the same specification. Seller does not have the right to use Tooling for other customer’s orders unless specifically authorized by a written agreement between Seller and Buyer. Title to Tooling used in manufacturing outside the United States shall remain with Seller. Title to Tooling used in manufacturing in the United States shall remain with Seller. Due to its proprietary nature, under no circumstances will Seller deliver Tooling to Buyer and Buyer, acknowledging same, expressly waives any rights to demand delivery of Tooling.

XIV. FORCE MAJEURE. Seller shall not be liable for any delay in performance or inability to perform occasioned by any causes beyond its control or beyond the control of its suppliers, manufactures, processors, or finishers including but without limiting the generality of the forgoing: fires, strikes, lockouts, labor difficulties, earthquakes, typhoons, embargoes, floods, delays by carriers, orders, rules or regulations of any foreign and/or domestic governmental authorities, trade associations or any other agency having control over export or import, voluntary quotas, restrictions, controls, unavailability or shortage of delay of any transportation. Intervention of any such cause(s) shall give the Seller the right, without liability to Buyer of any kind, to terminate this contract with respect to all or any portion of the products or services affected thereby or, upon removal of the cause, to resume deliveries is such proportions as it may determine until entire quantity purchased hereunder has been delivered.

XV. ASSIGNMENTS AND SUBCONTRACTS. Seller expressly reserves the right to assign or subcontract all or any portion of a purchase order with Buyer’s consent.

XVI. ARBIRATION. Any unresolved dispute arising pursuant to this contract shall be settled by arbitration. The arbitration shall be conducted in San Jose, California in accordance with the rules of the American Arbitration Association. Each party shall pay its own expenses associated with the arbitration, including 50% of the expenses of the neutral arbitrator(s). The judgment shall be binding and entered in any court having jurisdiction thereof.

XVII.GENERAL. the laws of the State of California, USA govern this contract. This contract is the complete and exclusive statement of the agreement between the parties and supersedes all proposals, oral or written, and all other communications between the parties relating to subject matter of this contract. Any Ts&Cs of any purchase order or other instrument issued by Buyer in connection with this contract which is in addition to, and consistent with or different from the terms and conditions of this contract shall be of no force or effect. Only a written instrument duly executed by authorized representatives of Seller and Buyer may modify this contract. If any legal action, arbitration or other proceeding is brought to enforce or interpret the terms of this contract, the prevailing party shall be entitled to recover reasonable attorney’s fees and costs. Any waiver by either party of any condition, part, term or provision of this contract shall not be construed as a waiver of any other condition, part, term or provision or a waiver of any future event or circumstance. If any provision of this contract is held invalid or unenforceable, the remainder of the contract shall continue in full force and effect.

XVIII. VALUE-ADDED SERVICES. For Seller’s Value-Added Services, which include one or a combination of any following-packaging, wafer bumping and probing, assembly, testing, and burn-in (“Services”). Buyer warrants that any materials, supplies and items provided by Buyer (title to which shall remain with Buyer) are suitable for the Services. Buyer shall be solely responsible for all transportation, insurance, and risk of loss and damage of such materials, supplies and items. Buyer grants to Seller a purchase money security interest in such items until Seller is paid in full for the Services and Buyer shall execute any and all documents necessary to perfect such performance of Services. If any materials, supplies and items purchased by Seller pursuant to Buyers forecast(s) or purchase order for Services are not used to perform Services within 30 days of their purchase, Buyer agrees to pay Seller the full cost of such materials, supplies, or item in accordance with Section III above. Subject to the other provisions of these Ts&Cs, Seller warrants products to be free from Services- related defects in materials and workmanship for a period of 30 days from the date of shipment. Seller’s sole obligation for nonconforming products shall be to repair such products at a location designated by Seller or to credit the value of applicable Services, at Seller sole option. In no event shall Seller liability for nonconforming products exceed the value charged for Services. Subject first to obtaining Seller’s written consent and the agreement of both Buyer and Seller to appropriate charges; Buyer shall have the right to cancel purchase orders for Services.